Even
if
you press EASY, menu
settings do not switch to their
defaults automatically.
• Following menu settings remain
as
they
were set even during Easy Handycam
operation.
- [FILE NO. ]
- [VOLUME]
- [TV TYPE]
- [
~
DISPLAYj
- [BEEP]
- [SUB-T DATE]
- [CLOCK SET]
- [AREA SET]
- rDST SET1![SUMMERTIMEj
- [DEMO MODE]
- [
rr.J
LANGUAGE SET]
Your camcorder vibrates.
• Vibration occurs depending on the condition
of
the disc. This is not a malfunction.
The supplied Remote Commander
does not function.
• Set [REMOTE CTRLj to [ON] (p. 75).
• Insert a battery into the battery holder with
the
+/-
polarities correctly matching the
+/-
marks (p. 117).
• Remove any obstructions between the
Remote Commander and the remote sensor.
• Point the remote sensor away from strong
light sources such as direct sunlight or
overhead lighting. Otherwise, the Remote
Commander may not function properly.
Another DVD device malfunctions
when you use the supplied Remote
Commander.
• Select a commander mode other than DVD 2
for your DVD device, or cover the sensor
of
your DVD device with black paper.
Batteries/Power
sources
A vibration
is
felt
in
your hand or a
faint sound
is
heard during
operation.
• This is not a malfunction.
A motor sound
is
heard
in
the
camcorder when the disc cover
is
closed without a disc.
• Your camcorder is trying to recognize the
disc. This
is
not a malfunction.
Your camcorder gets warm.
• This is because the power has been turned on
for a long time. This is not a malfunction.
Turn off your camcorder and leave it for a
while
in
a cool place.
The power abruptly turns off.
• When approximately 5 minutes have elapsed
while you do not operate your camcorder,
the camcorder
is
automatically turned
off
(A.SHUT OFF). Change the setting
of
[A.SHUT OFF] (p. 75), or turn on the power
again,
or
use the AC Adaptor.
• Charge the battery pack (p. 22).
The CHG (charge) lamp does not
light while the battery pack
is
being
charged.
• Turn the POWER switch
to
OFF (CHG)
(p.22).
• Attach the battery pack to the camcorder
correctly (p. 22).
• Connect the power cord to the wall outlet
properly.
• The battery charge
is
completed (p. 22).
-f
...
Q
C
e:r
CD
en
:::T
Q
Q
-
Continued'"
89
To Next Page
Loading...
Need help?
Imaging
Audio
Display
Power
