105
“Memory Stick” Operations
Viewing a still picture – Memory photo playback
To return to the normal playback screen (single screen)
Press MEMORY +/– to move the B mark to the image you want to display on full
screen, then press MEMORY PLAY.
Files modified with personal computers
These files may not be displayed on the index screen. Image files shot with other
equipment may not be displayed on the index screen either.
Note
When displaying the index screen, the number appears above each image. This
indicates the order in which images are recorded on the “Memory Stick.” These
numbers are different from the data file names.
Viewing the recorded images using a personal computer
The image data recorded with your camcorder is compressed in the JPEG format. If you
use the application software, “PictureGear 3.2Lite” supplied with your camcorder, you
can see images recorded on a “Memory Stick” on a computer screen. Use the serial port
adaptor for Memory Stick supplied with your camcorder, the Memory Stick/PC card
kit or PC card adaptor for Memory Stick (not supplied) for this operation. For detailed
instructions on operation, refer to the operating instructions of the serial port adaptor,
Memory Stick/PC card kit or PC card adaptor for Memory Stick and application
software.
To Next Page
Loading...
Need help?
General