49
Advanced Playback Operations
Searching the boundaries of recorded
tape by title – Title search
If you use a tape with cassette memory, you can search for the boundaries of
recorded tape by title (Title search)(p. 114). Use the Remote Commander for this
operation.
(1) Set the POWER switch to VTR.
(2) Set CM SEARCH in
to ON in the menu settings (p. 76). Default setting is
ON.
(3) Press SEARCH MODE on the Remote Commander repeatedly, until the title
search indicator appears.
The indicator changes as follows:
TITLE SEARCH t DATE SEARCH t PHOTO SEARCH t PHOTO SCAN
t no indicator
(4) Press . or > on the Remote Commander to select the title for playback.
Your camcorder automatically starts playback of the scene having the title that
you selected.
To stop searching
Press x.
If you use a tape without cassette memory
You cannot superimpose or search a title.
In the mark
•The bar in the mark indicates the present point on the tape.
•The mark in the indicates the actual point you are trying to search.
If a tape has a blank portion between recorded portions
The title search function may not work correctly.
POWER
L
O
C
K
VTR
MEMORY
CAMERA
OFF
3
4
1
SEARCH
MODE
TITLE SEARCH
1 HELLO!
2 CONGRATULATIONS!
3 HAPPY NEW YEAR!
4 PRESENT
5 GOOD MORNING
6 WEDDING
TITLE SEARCH
3 HAPPY NEW YEAR!
4 PRESENT
5 GOOD MORNING
6 WEDDING
7 NIGHT
8 BASEBALL
To Next Page
Loading...
Need help?
General