25
Playback – Basics
4
5
36
1
2
REW
PLAY
VOLUME
+
–
POWER
L
O
C
K
VTR
MEMORY
CAMERA
OFF
— Playback – Basics —
Playing back a tape
You can monitor the playback picture on the LCD screen. If you close the LCD panel,
you can monitor the playback picture in the viewfinder. You can control playback using
the Remote Commander supplied with your camcorder.
(1) Install the power source and insert the recorded tape.
(2) Press OPEN to open the LCD panel.
(3) Set the POWER switch to VTR while pressing the small green button. The
video control buttons light up.
(4) Press m to rewind the tape.
(5) Press N to start playback.
(6) To adjust the volume, press either of the two buttons on VOLUME.
To stop playback
Press x.
To Next Page
Loading...
Need help?
General