73
Editing
To change a title you have stored
In step 3, select CUSTOM1 or CUSTOM2, depending on which title you want to change,
then press the SEL/PUSH EXEC dial. Turn the SEL/PUSH EXEC dial to select [C], then
press the dial to delete the title. The last character is erased. Enter the new title as
desired.
If you take five minutes or longer to enter characters in the standby mode while a
cassette is in your camcorder
The power automatically goes off. The characters you have entered remain stored in
memory. Set the POWER switch to OFF once and then to CAMERA again, then
complete your title.
We recommend setting the playback or playback pause mode or removing the cassette
so that your camcorder does not automatically turn off while you are entering title
characters.
To erase a character
Turn the SEL/PUSH EXEC dial to select [C], then press the dial. The last character is
erased.
To enter a space
Select [ ], then select the blank part.
Making your own titles
To Next Page
Loading...
Need help?
General