Step 2:Turning the power on, and setting the
date and time
1Open the LCDscreen of your camcorder.
Your camcorder is turned Oll and the lens cower is opened.
• To turn on your camcorder when the LCD screen is open, press POWER.
MODE lamp
POWER
POWER button
Select the desired language, then touch [Next].
5 ¸
vo
Select the desired geographical area with KI/lll, then touch [Next].
• To set the date and time again, touch _ (MENU) _ [Setup] _ [a(J)(Clock Settings)l _ ]Date
r
& Time Setting] _ [Date & Time]. \'\ hen an item is not on the screen, touch m/m until
the item appears.
_7
To Next Page
Loading...
Need help?
General