42
HCD-SB100/SB200
Ver. 1.1
SECTION 5
TEST MODE
DVD Processor Reset Procedure:
1. Press the DVD SETUP key on the remote commander to
enter the set up screen. The following SET UP menu is dis-
played.
2. Move the cursor to [TV Aspect,16:9 Wide] on the screen.
3. Press the following keys in the order of 1 t 3 t 9 t 7
t 1 t 3 t 9 t ENTER on the remote commander.
4. The following menu is displayed and the DVD Processor is
reset to the default set up when the product is shipped from
the factory.
5. Press any key on the remote commander to exit this mode.
The DVD Processor reset procedure is completed.
To Next Page
Loading...
Need help?
General
