39
Getting Started
again to record new images, see “Deleting all
scenes on the disc (Formatting)” on page 76.
• You can check the right disc using [DISC
SELECT GUIDE] on the HOME MENU (page
75).
You can use only a “Memory Stick Duo”
marked with or
(p. 132).
1 Open the LCD panel.
2 Insert the “Memory Stick Duo”
into the “Memory Stick Duo” slot
in the right direction until it clicks.
To eject a “Memory Stick Duo”
Open the LCD panel, lightly push the
“Memory Stick Duo” in once.
b Notes
• When the access lamp is lit or flashing, your
camcorder is reading/writing data. Do not shake
or knock your camcorder, turn the power off,
eject the “Memory Stick Duo,” or remove the
battery pack. Otherwise, image data may be
damaged.
• If you force the “Memory Stick Duo” into the
slot in the wrong direction, the “Memory Stick
Duo,” the “Memory Stick Duo” slot, or image
data may be damaged.
• When inserting or ejecting the “Memory Stick
Duo,” be careful so that the “Memory Stick
Duo” does not pop out and drop.
z Tips
• The number of recordable images vary,
depending on the image quality or the image
size. For details, see page 85.
“Memory Stick Duo”
Access lamp
(“Memory Stick Duo”)
To Next Page
Loading...
Need help?
Imaging and Video
Audio
Display
Power
Weight and Dimensions
