28
Getting started
Necessary setup before
using the unit
Some initial setups are necessary for the unit
depending on the TV or other components to be
connected.
For details on using the menu, see page 60.
For details on each menu item, see pages 61 to 63.
p To connect the unit to a normal TV
Set “TV TYPE” in “INITIAL SETUP” to “4:3
(PANSCAN)” or “4:3 (LETTERBOX).”
p To connect the unit to a wide-screen TV
Set “TV TYPE” in “INITIAL SETUP” to “16:9 .”
p To connect the player to a digital
component with a built-in Dolby Digital
decoder
Set “DIGITAL OUT” in “INITIAL SETUP” to
“DOLBY DIGITAL.”
p To listen to the sound through speakers
connected to an amplifier with a digital
connector, or to output the sound to a digital
component such as a DAT or MD deck
Set “DIGITAL OUT” in “INITIAL SETUP” to “D-PCM.”
“INITIAL SETUP” also includes other items such as
“DVD MENU,” “PARENTAL CONTROL,” etc. For
details, see page 60.
For basic operations such as using the unit, see
“Playing a DVD VIDEO” (page 29) and “Playing a
CD/VIDEO CD” (page 37). For additional features,
see from page 45.
Note
This unit conforms to the
PAL colour system. When
you play a disc recorded
in the NTSC colour
system, the unit outputs
the video signal in the
PAL colour system.
To Next Page
Loading...
Need help?
General
