Handling the “Memory Stick”
185
Chapter 7 Saving and Loading User Setting Data
The “Memory Stick” can be inserted to or
removed from the camcorder with the power
turned on or off.
”Memory Sticks” usable with this
camcorder
With this camcorder, you can use a Sony
“Memory Stick”, “Memory Stick Duo”,
“Memory Stick PRO” whose capacity does not
exceed 4 GB, and “Memory Stick PRO Duo”.
For details, see “About a “Memory Stick”” on page
234.
Inserting a “Memory Stick”
1 Open the cover of the menu operating
section.
2 Hold the “Memory Stick” with the
notch facing downward and the arrow
facing away from you, and insert the
“Memory Stick” into the “Memory
Stick” slot until it clicks into place. Then
close the cover.
Note
If it does not fit into the slot properly or if there is some
resistance when you insert it, the “Memory Stick” may
be turned around or upside down. Do not force the
“Memory Stick” into the slot. Confirm the direction of
the notch and arrow on the “Memory Stick” before
inserting the “Memory Stick” and then try inserting it
again.
To remove the “Memory Stick”
1 Check that the access indicator is not lit,
then gently press in the “Memory
Stick” once and release.
The “Memory Stick” pops out.
2 Pull the “Memory Stick” towards you
to withdraw it from the slot.
Note
Do not remove the “Memory Stick” while the access
indicator is lit. You may lose data, or damage the
“Memory Stick”.
To protect saved data
To prevent accidental erasure of important setup
data, slide the LOCK switch on the “Memory
Stick” right to the write protect position.
It is now impossible to write or delete data on the
“Memory Stick”. If you try to do so, the message
“MEMORY STICK LOCKED” appears and the
data cannot be overwritten or deleted.
Note
“Memory Stick Duo” and “Memory Stick PRO Duo” do
not have this function.
To format a “Memory Stick”
Note
Do not format the “Memory Stick” using a PC.
Chapter7
Saving and Loading User Setting Data
Handling the “Memory
Stick”
Label
To Next Page
Loading...
Need help?
General
