Settingsforthe tuner
(TUNERmenu)
You can use the TUNER menu to set the FM
station receiving mode and to name preset
stations.
Select "4-TUNER" in the amplifier menus.
For details on adjusting the parameters, see
"Navigating through menus" (page 36) and
"Overview of the menus" (page 37).
TUNER menu parameters
• FM MODE (FM station receiving
mode)
• FM AUTO
This receiver will decode the signal as stereo
signal when the radio station is broadcast in
stereo.
• FM MONO
This receiver will decode the signal as mono
signal regardless of the broadcast signal.
• NAME IN (Naming preset
stations)
Lets you set tile name of preset stations. For
details, see "Naming preset stations" (page
56).
Settingsfortheaudio
(AUDIO menu)
You can use the AUDIO menu to make
settings for the audio to suit your preference.
Select "5-AUDIO" in the amplifier menus. For
details on adjusting the parameters, see
"Navigating through menus" (page 36) and
"Overview of the menus" (page 37).
AUDIO menu parameters
• DEC. PRI. (Digital audio input
decoding priority)
Lets you specify the input mode for the digital
signal input to the DIGITAL IN jacks.
• DEC. AUTO
Automatically switches the input mode
between DTS, Dolby Digital, or PCM.
• DEC. PCM
PCM signals are given priority (to prevent
interruption when playback starts).
However. when other signals are input, there
may be no sound depending on the format.
In this case, set to "DEC. AUTO".
Note
When set to "DEC. AUTO" and the sound l?om the
digital audio.jacks (for a CD. etc.) is interrupted
when playback starts, set to "DEC. PCM'.
3
O
o
continued_
41 G8
To Next Page
Loading...
Need help?
General
