SPEAKERS (OFF/A/B/A+B)
I
Press SPEAKERS (OFF/AlB/A+B)
repeatedly to select the speaker
system you want to drive.
:J
cc
en
-
m
.,
-
CD
0.
•
Light up
SPB
SPA
SPA
SP
B
To select
The
speakers connected to the
SPEAKERS
mterminals
The speakers connected to the
SPEAKERS
mterminals
The speakers connected to both the
SPEAKERS
mand mterminals
(parallel connection)
6:
Selecting
the
speaker
system
You can select the speakers you want to drive,
if you have connected the speakers to
SPEAKERS
mand mterminals.
Be sure io use the buiIOns on ihe receiver for
this operation.
To
turn off the speaker output
Press SPEAKERS (OFF/A/B/A+B)
repeatedly until the
"SP
A" and
"SP
B"
indicators on the display do not light up.
Notes
• Do not leave the remote
in
an extremely hot
or
humid place.
• Do not use a new battery with old ones.
• Do not mix manganese batteries and other kinds
of
batteries.
•
Do
not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.
·If
you do not intend to use the remote for an
extended period
of
time, remove the batteries to
avoid possible damage from battery leakage and
corrosIOn.
• When you replace the batteries, the remote buttons
may be reset to their factory settings.
If
this
happens, reassign the buttons again (page 28).
• When the remote no longer operates the receiver,
replace all the batteries with new ones.
Insert two R6 (size-AA) batteries in the
RM-AAU055 Remote Commander.
Observe the correct polarity when installing
batteries.
Note
You cannot switch the speaker system by pressing
SPEAKERS
(OFF/A/B/A+B) when the headphones
are connected.
17
GB
To Next Page
Loading...
Need help?
General
Weight and Dimensions
