Cfi
.....
(Models of area code
U,
CA only)
You
can change the AM tuning scale to either
9 kHz or
10kHz
using the buttons on the
receIver.
Presetting
radio
stations
You can preset up
to
30 FM stations and 30
AM stations. Then you can easily tune
in
the
stations you often listen to.
1/6
TUNING MODE
1 Press
1/6
to turn off the
receiver.
2 While holding down TUNING
MODE, press
1/6.
3 Change the current
AM
tuning
scale to 9 kHz (or
10kHz).
To
reset the scale to 10 kHz (or 9 kHz),
repeat the procedure above.
Note
All preset stations will be erased when you change
the tuning scale.
TUNER
Numeric
buttons
AMP
MENU
MEMORY,
ENTER
PRESET
+/-
1 Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2 Tune
in
the station that you
want to preset using Auto
Tuning (page 22) or Direct
Tuning (page 22).
Switch the FM reception mode,
if
necessary (page 22).
3 Press MEMORY.
You can also use MEMORY/ENTER on
the receiver.
"MEMORY"
lights up for a few seconds.
Perform steps 4 and 5 before
"MEMORY" goes out.
•
o
~
CD
.,
Q)
-
o'
::::s
en
continued----
23
GB
To Next Page
Loading...
Need help?
General
Weight and Dimensions
