Sony STR-DH100 User Manual

Adjusting the tone
Tuner Operations
You can adjust the tonal quality of the
speakers.
Listening to FM/AM radio
Press TREBLE + or TREBLE -
repeatedly to adjust the treble
level.
Press BASS
+ or BASS -
repeatedly to adjust the bass level.
You can adjust from -10 dB to + 10 dB in 1dB
step.
The initial setting is 0 dB.
»
3
'0
~
CD
..,
o
'0
CD
..,
Q)
-
o
~
en
•
AM
10 kHz*
9 kHz
Numeric
buttons
TUNER
ENTER
D.TUNING
TUNING +/-
100 kHz
50 kHz
FM
~H-- FM MODE
Area code
CEL, CEK
U,CA
* The AM tuning scale can be changed (page 23).
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the
FM and
AM antennas (aerials) to the receiver (page
15).
Tip
The tuning scale for direct tuning differs depending
on the area code as shown in the following table. For
details on area codes, see page 4.
TREBLE
+/-
BASS
+/-
21
GB

Sony STR-DH100 Specifications

General

Impedance	8 Ω
Frequency range	20 - 20000 Hz
RMS rated power	200 W
Audio output channels	2.0 channels
Total Harmonic Distortion (THD)	1 %
Power output per channel (20-20KHz@8 Ohm)	100 W
Supported radio bands	AM, FM
Radio Data System (RDS)	Yes
I/O ports	2 x Anten.\\r 1 x DM\\r
Connectivity technology	Wired
Speakers connectivity type	-
Headphone outputs	1
S-Video outputs quantity	No
Product color	Black
Apple docking compatibility	Not supported
Channels quantity	2ch channels
Dimensions (WxDxH)	430 x 132.5 x 279 mm
Power requirements	AC120 V, 60 Hz
Power consumption (standby)	0.3 W

Weight and Dimensions

Weight	6600 g