4 Press the numeric buttons to
select a preset number.
You can also press PRESET +
or
PRESET - repeatedly to select a preset
number.
If
"MEMOR
Y" goes out before you
select the preset number, start again from
step
3.
5 Press ENTER.
You can also use MEMORY/ENTER on
the receiver.
The station is stored as the selected preset
number.
If
"MEMORY"
goes out before you press
ENTER, start again from step
3.
6 Repeat steps 1 to 5 to preset
another station.
1 Press TUNER repeatedly to
select the
FM
or
AM
band.
2 Press PRESET + or PRESET -
repeatedly to select the preset
station you want.
Each time you press the button, you can
select a preset station as follows:
rOJ~02~01~04~05~
...
~271
L------+,30_29
-28
+-~
---~
You can also press the numeric buttons to
select the preset station you want. Then,
press ENTER to enter the selection.
24
GB
Using the controls on the
receiver
1 Turn INPUT SELECTOR to select the FM
or AM band.
2 Press TUNING MODE repeatedly to select
"PRESET
T.".
3 Press TUNING + or TUNING - repeatedly
to select the preset station you want.
(Bii~l!.u!.B\@~~@t~1
1 Press TUNER repeatedly to
select the
FM
or AM band.
You can also use INPUT SELECTOR on
the receiver.
2 Tune
in
the preset station you
want to create
an
index name
for (page 24).
3 Press AMP MENU.
"BALANCE" appears on the display.
4 Press +,+ repeatedly to select
"NAME IN", then press
0 or +.
The cursor flashes and you can select a
character.
5 Press +,+ to select a character,
then press
+,+
to move the
cursor to the next position.
If
you
made a mistake
Press
./.
until the character you want to
change flashes, then press
+/+
to select
the correct character.
Tips
•
You
can select the character type as follows
by pressing
+1+.
Alphabet (upper case)
--
Numbers--
Symbols
·To
enter a blank space,
press.
without
selecting a character.
6 Press
0.
The name you entered is registered.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
