8
GB
Parts and Controls
(power)
Turns the receiver on or sets it to the
standby mode.
Power indicator
•Green: The receiver is turned on.
•Red: The receiver is in standby mode,
and you have set one of the following:
– “CTRL.HDMI” is set to “CTRL ON”.
– “BT STBY” is set to “STBY ON”.*
– “STBY.THRU” is set to “ON” or
“AUTO”.
•The indicator goes off: The receiver is
in standby mode and:
– “CTRL.HDMI” is set to “CTRL OFF”.
– “BT STBY” is set to “STBY OFF”.
– “STBY.THRU” is set to “OFF”.
* The indicator lights up in red only if a device
has been paired with the receiver and “BT
POWER” is set to “BT ON”. If no devices are
paired with the receiver or “BT POWER” is
set to “BT OFF”, the indicator turns off.
SPEAKERS (page 46)
Switches the speaker system.
No sound is output from the speakers when
you select “OFF SPEAKERS”. Be sure to select
setting other than “OFF SPEAKERS”.
TUNING MODE
Selects auto tuning or preset tuning
mode.
TUNING +/–
Scans a FM station or selects preset
stations/channels.
2CH/MULTI, MOVIE, MUSIC
(page 39)
Display panel (page 10)
NIGHT MODE
Activates the Night Mode function
which allows you to retain a theater-
like environment at low volume levels.
• The Night Mode function does not work in
the following cases:
– [Pure Direct] is set to [On].
Receiver front panel
Note
Note
To Next Page
Loading...
Need help?
General
Weight and Dimensions
