Video cable (not supplied)
Component video cable (not supplied)
Optical digital cable (not supplied)
Audio cable (not supplied)
Note
Connect a TV monitor or a projector to the HDMI OUT or MONITOR VIDEO OUT jack on
the receiver.
Depending on the status of the connection between the TV and the antenna (aerial), the
image on the TV screen may be distorted. If this is the case, place the antenna (aerial)
farther away from the receiver.
When connecting an optical digital cable, insert the plugs straight until they click into
place.
Do not bend or tie optical digital cables.
Hint
All of the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz
sampling frequencies.
The receiver has a video conversion function. For details, see “Function for conversion of
video signals.”
When connecting a TV to the receiver via the TV IN jacks of the receiver, set the sound
output jack of the TV to [Fixed] if it can be switched between either [Fixed] or [Variable].
To Next Page
Loading...
Need help?
General
