Lets you set the priority when you select the same input for both the main zone and zone 2.
1. Select [Setup] - [HDMI Setup] from the home menu.
2. Set [Priority].
Main & Zone2:
You can enjoy the same input in the main zone and zone 2. However, there may be
some interference in the audio and video signals in the main zone and zone 2.
Main Only:
You can enjoy good audio and video quality in the main zone. There is no output in
zone 2.
Note
This function is enabled only when [HDMI Out B Mode] is set to [Zone2].
[98] Adjusting Settings
HDMI Setup
Speeding up the display when switching the HDMI input
(Fast View)
You can set the Fast View function for the HDMI inputs.
1. Select [Setup] - [HDMI Setup] from the home menu.
2. Select [Fast View].
3. Select the setting you want.
Auto: You can select HDMI input faster than normal selection.
Off: The Fast View function is not available.
Note
This function is enabled only when [HDMI Out B Mode] is set to [Main].
If you select [Off], it takes more time for images to appear after switching the input.
However, the sound quality is improved because the receiver receives signals only from
the selected HDMI input jack.
To Next Page
Loading...
Need help?
General
