[103] Adjusting Settings Zone Setup
Presetting the volume in zone 2/3 (Zone2/3 Preset
Volume)
Set the volume in zone 2 or zone 3 when turning on the receiver.
1. Select [Setup] - [Zone Setup] from the home menu.
2. Select [Zone2 Preset Volume] or [Zone3 Preset Volume].
3. Adjust the volume.
[104] Adjusting Settings Zone Setup
Setting the volume control for zone 2/3 (Line Out)
You can set variable or fixed volume control for the ZONE 2 AUDIO OUT/ZONE 3 AUDIO
OUT jacks.
1. Select [Setup] - [Zone Setup] from the home menu.
2. Select [Zone2 Line Out] or [Zone3 Line Out].
3. Select the setting you want.
Variable:
Select when you cannot adjust the volume level on the amplifier in zone 2 or zone 3.
The volume level of the receiver output in zone 2 or zone 3 will become adjustable.
Fixed:
Select to adjust the volume on the amplifier in zone 2 or zone 3. The volume level of
the receiver output in zone 2 or zone 3 on the receiver will be fixed.
Note
When [Variable] is set, the volume is turned down by default. Turn up the volume while
listening to the sound after completing setup.
[105] Adjusting Settings
System Setup
To Next Page
Loading...
Need help?
General
