38
You can erase all the titles in the HDD at once.
Note that any protected titles, including the timer
settings, will also be erased.
1 Press SYSTEM MENU while the recorder is
in stop mode.
2 Select “SETUP,” and press ENTER.
3 Select “Others,” and press ENTER.
4 Select “Format Hard Disk,” and press
ENTER.
The display for entering the password
appears.
5 Enter your four digit password using the
number buttons.
• If you have not yet set a password, enter
“0000” (default). To set or change the
password, see page 44.
The display asks for confirmation.
6 Select “OK” and press ENTER.
7 Select “Start” and press ENTER.
All titles in the HDD are erased.
The recorder automatically turns off.
b Note
If you forget your password, you will have to reset it by
selecting “Factory Setup” in “Others” setup (page 45).
Erasing all titles (Format Hard
Disk)
To Next Page
Loading...
Need help?
General