9
Hookups and Settings
Hookups and Settings
Hooking Up the Recorder
Follow steps 1 to 7 to hook up and adjust the settings of the recorder.
b Notes
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
• You cannot connect this recorder to a TV that does not have a video input jack.
• Be sure to disconnect the mains lead of each component before connecting.
Step 1: Unpacking
Check that you have the following items:
• Audio/video cord (phono plug × 3 y phono plug × 3) (1)
• Component video cord (phono plug × 3 y phono plug × 3) (1)
•Mains lead (1)
• Aerial cable (2 : long × 1, short × 1)
• Remote commander (remote) (1)
• R6 (size AA) batteries (2)
To Next Page
Loading...
Need help?
General