Specifications
33
Pin assignment
PARALLEL REMOTE terminal
Modular connector
(8-pin)
You can allocate functions using the REMOTE menu.
Wiring required to use the Remote Control
Connect the function you want to use with a Remote
Control to the Ground (Pin 5).
Pin number Functions
1 Set input signal LINE A
2 Set input signal LINE B
3 Set tally lamp on or off
4 Select underscan
5 GND
6 Set blue only on or off
7 Select aspect ratio 16:9
8 Select external sync
1
8
To Next Page
Loading...
Need help?
General