Sony VPL-FHZ55 Service Manual

2-4 (E)
VPL-FHZ55
2-4-2. Setting of This Unit and Power Meter Sensor
1. Set the lens shift to the right projection.(Center in horizontal direction, lower limit in vertical direc-
tion)
2. Set the lens zoom to tele end.
3. Set the lens focus to infinity. (Lens retracted state)
4. Attach the aperture and bandpass filter to the laser power sensor as shown in the illustration, and set it
in front of the lens of this unit.
n
Check the distance between the lens edge of this unit and the aperture end (59.0 mm) at the two or
more points.
5. Set so that the light output from the lens is vertical to the sensor surface of the laser power sensor.
6. Set so that the Φ7.0 mm hole is located at the center of the projected image.
Create the aperture with the following specifications.
. Φ7.0 mm
. t = 0.3 mm or less
. Color: Black
. Metal (aluminum, etc.)
7. Set the laser power sensor as follows.
. Filter: IN
. Range: 300 mW
. Wavelength: 448 nm
59.0 mm
Aperture end Lens edge
Bandpass filter
Aperture
Laser power sensor

Sony VPL-FHZ55 Specifications

General

Native aspect ratio	16:9
Projection distance	- m
Projection technology	3LCD
Supported aspect ratios	-
Contrast ratio (typical)	8000:1
Screen size compatibility	40 - 600 \
Projector native resolution	1080p (1920x1080)
Keystone correction, horizontal	30 °
Focus	Manual
Throw ratio	1.4 - 2.3:1
Zoom capability	Yes
Focal length range	- mm
Vertical lens shift range	- %
Service life of light source	20000 h
3D	No
Supported video modes	480p, 576p, 720p, 1080i, 1080p
Analog signal format system	NTSC 3.58, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions	1920 x 1200 (WUXGA)
BNC input ports	5
Serial interface type	RS-232
USB 2.0 ports quantity	0
Noise level	40 dB
Noise level (economic mode)	35 dB
On Screen Display (OSD) languages	ARA, CHI (SIMPL), CHI (TR), DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, IND, ITA, JPN, KOR, NOR, POL, POR, RUS, SWE, THA, TUR, VIE
Placement	Desktop
Product type	Large venue projector
Product color	White
Power source	DC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	35 - 85 %
Cables included	AC
Remote control type	IR

Weight and Dimensions

Depth	487 mm
Width	390 mm
Height	134 mm
Weight	11000 g