Sony VPL-FHZ55 Service Manual

2-11 (E)
VPL-FHZ55
2-5-2. Main (Scan Converter)
1. Copy the files to be written into the same folder of application file FlashUpgrader.exe.
n
For files to be written, please contact your local Sony Sales Office/Service Center.
2. Double-click FlashUpgrader.exe to start the application.
Application name: Pixelworks ImageProcessor SDK FlashUpgrader/SONY Custom
File name: FlashUpgrader.exe
3. Set the writing settings.
Common settings:
. Select Flash in Modes.
. Place the check on Notify On Completion.
. Place the check on Reset Target After Download.
For RS-232C connection:
. Select Serial.
. Select the serial port number used for connecting PC in COM Port.
. Select 115200 in Baud Rate.
. Place the check on UART_SW.
For USB-RS-232C dual connection:
. Select USB-SONY.
. Select the serial port number used for connecting PC by RS-232C in COM port.
. Select 38400 in Baud Rate.
4. Select the update file.
Click the [Choose...] button, then select the target inf file.
5. Click the [Flash] button.
The update starts and a status bar is displayed.
Moreover, the [Flash] button changes to the [Cancel] button.
When the message “Flash Completed!” is displayed, the update is completed.
Or when the [Cancel] button changed to the [Flash], the update is completed.
6. When continuing the update, perform the following.
For RS-232C connection: Turn off and on the power of this unit, then perform the
procedure from step 4.
For USB-RS-232C dual connection: Change the Connection setting to “USB-FS”, then
perform the procedure from step 4.
7. After the update is completed, disconnect the power cord. (Update completed)

Sony VPL-FHZ55 Specifications

General

Native aspect ratio	16:9
Projection distance	- m
Projection technology	3LCD
Supported aspect ratios	-
Contrast ratio (typical)	8000:1
Screen size compatibility	40 - 600 \
Projector native resolution	1080p (1920x1080)
Keystone correction, horizontal	30 °
Focus	Manual
Throw ratio	1.4 - 2.3:1
Zoom capability	Yes
Focal length range	- mm
Vertical lens shift range	- %
Service life of light source	20000 h
3D	No
Supported video modes	480p, 576p, 720p, 1080i, 1080p
Analog signal format system	NTSC 3.58, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions	1920 x 1200 (WUXGA)
BNC input ports	5
Serial interface type	RS-232
USB 2.0 ports quantity	0
Noise level	40 dB
Noise level (economic mode)	35 dB
On Screen Display (OSD) languages	ARA, CHI (SIMPL), CHI (TR), DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, IND, ITA, JPN, KOR, NOR, POL, POR, RUS, SWE, THA, TUR, VIE
Placement	Desktop
Product type	Large venue projector
Product color	White
Power source	DC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	35 - 85 %
Cables included	AC
Remote control type	IR

Weight and Dimensions

Depth	487 mm
Width	390 mm
Height	134 mm
Weight	11000 g