2 Ordering information
To order the STM32H7B3I-EVAL Evaluation board, refer to Table 1. For a detailed description, refer to its user
manual on the product web page. Additional information is available from the datasheet and reference manual of
the target STM32.
Table 1. List of available products
Order code Board references Target STM32
STM32H7B3I-EVAL
• MB1331
• MB1370
(1)
• MB1379
(2)
• MB1486
(3)
STM32H7B3LIH6QU
1. LCD board
2. Camera module
3.
Wi-Fi
®
module
2.1 Product marking
Evaluation tools marked as “ES” or “E” are not yet qualified and therefore not ready to be used as reference
design or in production. Any consequences deriving from such usage will not be at ST charge. In no event, ST will
be liable for any customer usage of these engineering sample tools as reference designs or in production.
“E” or “ES” marking examples of location:
• On the targeted STM32 that is soldered on the board (For an illustration of STM32 marking, refer to the
STM32 datasheet “Package information” paragraph at the www.st.com website).
• Next to the evaluation tool ordering part number that is stuck or silk-screen printed on the board.
This board features a specific STM32 device version, which allows the operation of any bundled commercial
stack/library available. This STM32 device shows a "U" marking option at the end of the standard part number
and is not available for sales.
In order to use the same commercial stack in his application, a developer may need to purchase a part number
specific to this stack/library. The price of those part numbers includes the stack/library royalties.
2.2 Codification
The meaning of the codification is explained in Table 2. The order code is mentioned on a sticker placed on the
top or bottom side of the board.
Table 2. Codification explanation
STM32TTXXY-EVAL Description Example: STM32H7B3I-EVAL
STM32TT MCU series in STM32 32-bit Arm Cortex MCUs STM32H7 Series
XX MCU product line in the series STM32H7B3
Y
STM32 Flash memory size:
• I for 2 Mbytes
2 Mbytes
UM2662
Ordering information
UM2662 - Rev 1
page 3/95