5 Delivery recommendations
Some verifications are needed before using the board for the first time to make sure that nothing was damaged
during shipment and that no components are unplugged or lost. When the board is extracted from its plastic bag,
check that no component remains in the bag. Before starting the demo, take the microSD
™
card from the
separated ESD bag and plug it in the connector CN28, on the right side of the board.
Warning:
There is an explosion risk if the battery is replaced by an incorrect one. Make sure to dispose of
used batteries according to the instructions.
UM2662
Delivery recommendations
UM2662 - Rev 1
page 6/95
To Next Page
Loading...
Need help?
General
