To Next Page

To Previous Page

– 19 –

ENGLISH

5. Loading the Roll Paper

Be sure to use roll paper that matches the printer’s specification.

Push the Cover open lever, and open

the printer cover.

While observing the direction of the

roll, set the paper roll into the hollow,

and pull on the leading edge of the

paper toward you.

Note 1: When you use a paper of the

thickness which needs the tension bar

(65

m paper thickness<100

m),

make sure not to pass the paper under

the tension bar.

Note 2: When you use a paper of the

thickness which doesn’t need the ten-

sion bar (100

m paper thickness 150

m), please remove two screws at both

sides of the tension bar with a screw-

driver, and remove the tension bar unit

in advance. Ordinarily, this procedure

(removal of the tension bar) should

already have been done by your dealer.

Cover open lever

Roll paper

Tension bar

Roll paper

(Wall Mount/Standard Model)

(Standard Model)

Star Micronics TSP800 Series User Manual

Other manuals for Star Micronics TSP800 Series