EN
ENGLISH
(Translation of the original instructions)
12 PURCHASE CONDITIONS
The warranty covers all material and manufacturing defects.
The user must follow all the instructions provided in the accompanying documentation.
The warranty does not cover damages caused by:
• Failure to become familiar with the documentation accompanying the machine.
• Carelessness.
• Incorrect or prohibited use or assembly.
• Use of non-genuine spare parts.
• Use of accessories not supplied or approved by STIGA SpA.
The warranty does not cover:
• Normal consumable material wear such as worm screws, etc.
• Normal wear and tear.
• Engines. Engines are covered by the warranty provided by the relative manufacturer in compliance
with the specied terms and conditions.
The purchaser is protected by his or her own national legislation. The purchaser’s rights under the na-
tional laws or his or her own country are not in any way restricted by this warranty.
13 SUMMARY MAINTENANCE TABLE
Intervention Frequency
working hours/calendar months
Par. /
Ref.
g.
First time Subsequently
MACHINE
Check all fasteners - Before each use -
Safety checks/check controls - Before each use -
Tyre pressure check - Before each use -
General cleaning and inspection - After each use -
General lubrication - 50 hours and after each
cleaning
9.12
Check transmission belt wear 5 hours 50 hours 9.8
Check/adjust the steering wheel 5 hours 100 hours 9.9
Battery power reserve - Before storage.
In machines with electric
starter: charge every 4
months
9.10
Clean battery terminals - When oxidised 9.10.4
ENGINE/TRANSMISSION (general)
Check/top-up engine oil - Before each use 9.5.1
Check/top up drive oil 1 hour 50 hours 9.7.1
Transmission oil change 5 hours 200 hours 9.7.2
25
To Next Page
Loading...
Need help?
General
