FORESTER NA. (E)
10
Maintenance and service
10-47
– CONTINUED –
the cargo area of the vehicle.
3. Check the tires for correct inflation pressure.
4. Make certain that the vehicle’s gas tank is full and that someone is
seated in the driver’s seat.
5. Bounce the vehicle several times to normalize the suspension.
J To check the headlight aim
To check the headlight aim, check the vertical and horizontal gauges on
the back of head lights.
HS0209
Vertical beam
angle gauge
Horizontal beam
angle gauge
HG0189
Vertical beam angle gauge
OM-H0379
Acceptable Acceptable
Center
mark
Bubble
1. Look at the vertical beam angle gauge. The bubble on the gauge
should not deviate from the center of the gauge by more than four seg-
ments on either side of the gauge.
To Next Page
Loading...
Need help?
General
