Supermicro X10DRL-i SUPERO User Manual

Chapter 1: Overview
1-7
Motherboard Features
CPU
• Dual Intel
®
E5-2600V3 Series Processors (Socket
R3-LGA 2011); each processor supports dual full-
width Intel QuickPath Interconnect (QPI) links (of up
to 9.6 GT/s one direction per QPI)
Memory
• Integrated memory controller supports: Up to 512
GB of DDR4 (288-pin) Registered (RDIMM)/Load
Reduced (LRDIMM) ECC 2133/1866/1600 MHz in
8 slots
Note 1: Memory speed support depends on the
CPUs installed in the system.
Note 2: For the latest CPU/memory updates,
please refer to our website at http://www.super-
micro.com/products/motherboard.
DIMM sizes
• DIMM 4GB, 8GB,16GB, 32GB, QR/LRDIMM
or 8R/LRDIMM @ 1.2V
Chipset
• Intel® PCH C612
Expansion
• Three (3) PCI Express 3.0 x8 slots (CPU1 Slot2/
CPU1 Slot3/CPU1 Slot6),
• One (1) PCI-Express 3.0 x16 slot (CPU1 Slot5),
• One (1) PCI-Express 3.0 x4 in x8 slot (CPU2 Slot4),
• One (1) PCI-Express 2.0 x4 in x8 slot (PCH Slot1)
Slots
Graphics
• Graphics Controller via Aspeed 2400 BMC
Network
• Dual Intel i210 Gigabit (10/100/1000 Mb/s) single-
port Ethernet controllers for LAN 1/LAN 2 ports
• Aspeed 2400 Base-board Controller (BMC) supports
IPMI_LAN 2.0
I/O Devices
SATA Connections
• SATA Ports Six (6) SATA 3.0 Ports support-
ed by Intel PCH (I-SATA 0-5),
Four (4) SATA 3.0 Ports support-
ed by Intel SCU (S-SATA 0-3)
• RAID RAID 0, 1, 5, 10
IPMI 2.0
• IPMI 2.0 supported by Aspeed 2400
Serial (COM) Ports

Supermicro X10DRL-i SUPERO Specifications

General

Brand	Supermicro
Model	X10DRL-i SUPERO
Category	Motherboard
Language	English