-AWARNING
Failure to torque and to apply
thread lock to specified bolts
and nuts properly could lead to
an accident.
Torque bolts and nuts to the
proper specifications. Apply
thread lock to specified bolts
properly. If you are not sure of
the proper procedure, have
your authorized SUZUKI dealer
or qualiied mechanic do this.
Rear axle tightening torque:
65 N.m (6.5 kgf-m, 47.0 Ib-ft)
Rear brake caliper holder mount-
ing nut tightening torque:
39 N.m (3.9 kgf-m, 28.0 Ib-ft)
LIGHT BULB REPLACEMENT
The wattage rating of each bulb is
shown in the following chart.
When replacing a burned out
bulb, always use the same watt-
age rating.
CAUTION
Using a light bulb with the
wrong wattage rating can
cause electrical system dam-
age or shorten bulb lie.
Always use the specified light
bulb.
Headlight
12V 60/55W (H4)
Turn signal
light
Front I 12V 21/5W
Rear
I
12V 21W
Brake Iightfaillght
12V 21/5W
72
To Next Page
Loading...
Need help?
General
