48
3. Fully steer the motor to the starboard side.
4. Place a drain pan under the engine oil drain
plug.
5. Remove the engine oil drain plug and gas-
ket, then let the engine oil drain.
CAUTION
The engine oil temperature may be high
enough to burn your fingers when the
drain plug is loosened.
Wait until the drain plug is cool enough to
touch with bare hands before removing it.
6. After draining, secure the engine oil drain
plug with a new gasket.
7. Fill with recommended engine oil to the
upper level.
Oil capacity: 0.7 L (0.74/0.62 US/Imp qt)
Engine oil: SAE (or NMMA FC-W) 10W-40,
10W-30
API (or NMMA FC-W) Classifica-
tion SG, SH, SJ, SL, SM
8. Check the engine oil level. Refer to the
INSPECTION BEFORE BOATING section.
NOTE:
To avoid incorrect measurement of engine oil
level, check oil level only when the engine has
cooled.
NOTICE
A previously-used gasket may leak,
resulting in engine damage.
Do not re-use gaskets. Be sure to always
use new gaskets.
Upper
limit
Lower
limit
To Next Page
Loading...
Need help?
General
