TRANSMISSION AND CRANKSHAFT 10-9
BEARING INSPECTION, REMOVAL AND
INSTALLATION
• Inspect the bearings for play, discoloration, wear and seizure.
• Move the inner race by finger and inspect for smooth move-
ment.
• Remove the bearing retainers.
• Remove the bearings 1 to 4 by hitting out from the other
side using the special tool.
09913-70210: Bearing installer set
• Remove the bearings 5 and 7 by hitting out from the other
side using the special tool.
09913-70210: Bearing installer set
• Remove the bearing 6 using the special tool and suitable
bars.
• Remove the bearing 8 using the special tool.
09921-20240: Bearing remover set
To Next Page
Loading...
Need help?
General
