15-10 FRONT AND REAR BRAKES
• Wrap the caliper with a rag to prevent brake fluid scatter and
piston pop-out.
• Apply low-pressure air into the caliper through the hole to
remove the piston.
• Remove the dust seal 7 and piston seal 8.
CALIPER INSPECTION
• Inspect the caliper cylinder for scuffing, wear and damage.
• Inspect the piston for scuffing, wear and damage.
WARNING
Fingers can get caught between piston and caliper
body when removing the piston.
Do not place your fingers on the piston when remov-
ing the piston.
To Next Page
Loading...
Need help?
General
