17-6 REAR SUSPENSION
• Install the dust seals.
NOTE:
When installing the dust seal, the stamped mark A on the dust
seal must face inside.
• Apply grease to the needle roller bearings and install them.
• Apply grease to the dust seals and spacers.
• Install the spacers A and B.
A for Right side
B for Left side
99000-25010: SUZUKI SUPER GREASE “A”
(or equivalent grease)
OIL REPLACEMENT
TOOLS AND EQUIPMENT
• Following tools and equipment are required to perform oil
replacement.
1 Screwdriver or small punch 7 Rags
2 Vise* 8 Nitrogen tank
3 Drain Pan 9 Filler Hose and Nozzle
4 Oilcan 0 Regulator Assembly
5 Beaker A Owner’s Service Manual
6 Specified Shock Oil (SS25)
* Not Shown in the illustration
125
To Next Page
Loading...
Need help?
General
