Swift Sterling User Manual

ELECTRICS
99
Exterior 230V socket
The recessed electric socket is designed
to give you a convenient electrical access
point on the outside of the caravan, which is
completely protected from the weather, even
when in use.
With the caravan stationary and connected to
a 220v/240v supply, raise the front cover of the
socket and insert the plug of the equipment to
be used. Close and latch the cover into place
to provide a weatherproof seal.
Please remember that the equipment
plugged into the socket may or may not be
weatherproof.
Note: Care should be taken when opening
the socket cover.
To disconnect equipment, raise socket cover
and remove plug, then close and latch the
cover into place to ensure a weatherproof seal.
Before moving the caravan from a pitch ensure
that all accessory points are disconnected and
latched in the closed position to prevent the
ingress of water or other foreign matter from
causing damage to the point or any of the
caravans services.
Any item plugged into this socket will be
supplied by the same 10A breaker (MCB) as
the other items plugged into sockets within
the caravan. Please take into account the
total loading placed on the socket circuit and
the site supply before switching equipment
on. The socket should be used to power a
single appliance with an appropriate power
consumption rating – the socket is NOT
suitable for use as a supply to power an
adjacent caravan or motorhome.
EXTERIOR 230V SOCKET

Swift Sterling Specifications

General

Brand	Swift
Model	Sterling
Category	Caravans
Language	English