FITTED EQUIPMENT
181
Operating instructions for
softrollo blinds
Hold the operating aluminium bar in the middle
and raise or lower the blind and flyscreen
independently, operating together will require
excessive force in operation.
Care instructions: Clean the blind only with
a damp sponge. Clean on a regular basis to
avoid dirt particle build up as this can damage
the blind material.
Use only water or with mild suds or a vacuum
cleaner.
In order to avoid material fatigue, do not leave
the flynet closed for a long time.
Maintenance
If operation of the soft Rollo blind is
exceptionally stiff, it is possible to spray the
guide - legs (left and right) with a Teflon - spray.
This will ease both the operation of the blind
and avoid any interruption/malfunction from
deposits in the guide legs which may affect the
operation.
Doorscreen
When drawing or releasing the doorscreen,
care should be taken not to let it spring back
freely, this may result in damage to the screen
or its fittings.
BLINDS
Fig. D
Fig. E
Fig. F
Fig. G
To Next Page
Loading...
Need help?
General