ELECTRICS
95
4.2 Approvals
System: BSEN 1648-1, BSEN1648-2
compliant, BS7671: 2008 compliant
Residual Current Device: RCD 40A 30mA trip
to BS EN 61008
Miniature Circuit Breakers: MCB’s type C
6000A breaking capacity to BSEN 60898
Electro Magnetic Compatibility (EMC) directive
2004/108/EC Certificate CE20071224-1
Integrated Charger: BS EN 60335-1/2.29,
2006/95EC, IEC61000-3.2/3:1995, 1.
Low Voltage Directive: 2006/95EC TUV-
014900-A1, EN55022, Class B, EN55024/
Level 2.
The battery box
The Battery Box is intended to accommodate
an auxiliary battery in your caravan. The
Battery Box has a CE socket to connect to a
230 V power supply. Inside the Battery Box
there is the option to fit several sockets and
outlets.
! WARNING:
• Use precaution when mounting the
battery, as batteries contain acid liquids
which can cause severe injuries and
damage when handled incorrectly. Refer to
the instructions on the battery.
• No smoking is allowed in the area of the
Battery Box!
• Please note that the CE socket has a max
of 16 amp.
• This product meets the latest version of the
EN 1648 part 1 and 2 standard.
Before placing the battery inside the Battery
Box, the battery should be placed in the
Soft Tray and rested on the ground adjacent
to the Battery Box. Carefully connect the
electrical wires (the red cable attaches to the
+ pole and the black cable to the - pole of
the battery).
Note: Incorrect connection of the cables
will cause a short circuit with potential
hazardous consequences.
After mounting the terminals, lift the battery
together with the Soft Tray into the middle
of the Battery Box compartment. Push the
battery to the back of the Battery Box.
The battery is then secured by restraining
straps (see figure A).
When attaching the 230 volt cable on the CE
socket, the maximum recommended thickness
of the cable is 10 mm. When closing the door,
the attached cable is to be fed through the slot
in the door.The maximum battery size that can
be fitted is 225mm high (including terminals) x
175mm deep x 353mm wide. The depth and
width dimensions include the rim around the
bottom used for securing the battery.
Figure A
Cleaning and maintenance
• Use protective clothing and glasses
when handling a leaking battery, and
avoid direct contact to the skin, eyes and
respiratory organ.
• Should a battery leakage occur, please act
according to the instructions supplied by the
manufacturer of the battery. Act with caution
as caustic substances are present in the
battery.
To Next Page
Loading...
Need help?
General