Swift Sterling User Manual

SAFETY AND SECURITY
52
ALARM SYSTEM
Awning Light button
Press and release the button to
turn the awning light on or off (note:
awning light control is an optional
feature not present in all caravan
models)
Programming Mode button
Press and hold the button for
10 seconds to access the 3
programming modes, which are
indicated by series of long beeps, as
follows:
One long beep
- Tilt sensor sensitivity adjustment
Press the arm/disarm button to select the
required setting. 1 beep = low sensitivity
for windy conditions. 2 beeps = standard
sensitivity (default). 3 beeps = High sensitivity.
Press the program mode button to move to
the next setting.
Two long beeps - Beeper volume
Press the arm/disarm button to cycle through
the 7 available volume levels. When you are
happy with the selected volume, press the
program mode button to move to the next
setting.
Three long beeps
- PIR movement detector sensitivity
Press the arm/disarm button to select the
required setting / pulse count. 1 beep = high
sensitivity 2 beeps = standard sensitivity
(default). 3 beeps = Low sensitivity for hostile
environments.
Press the program mode button again
to exit programming mode, which is
indicated by one extra long beep.
Operation - the PIR internal
movement sensor
The STINGER 310 comes complete with
a 120° Passive Infra Red (PIR) internal
movement sensor that detects body
movement within the vehicle.
If you are leaving pets
within the vehicle the
system should be armed
without the PIR sensor
active (see key fob arm/
disarm section) to prevent
your pet from triggering the
alarm.
Please be aware that direct sunlight onto the
PIR lens, or extremes of temperature (above
30 deg C) may affect the operation of the
detector. Always ensure roof light blinds are
closed if sunlight could shine directly onto
the PIR.
Operation - the tilt sensor
The STINGER 310 incorporates a new
electronic tilt and motion sensor with
automatic calibration and easy sensitivity
adjustment from the key fob. This feature
provides excellent tilt detection with no
moving parts.
The tilt sensor works automatically and does
not need adjustment for normal use even if you
park on a steep incline. The sensitivity of the
sensor can be adjusted as described in the
key fob programming section.
Operation - awning light
(model specific)
When the STINGER 310 alarm system is
armed or disarmed the Awning light will be
activated for a period of one minute to provide
illumination whilst entering or exiting the
caravan. The Awning light can be turned off
during this period by pressing the Awning light
button on the key fob if required.
(Note: awning light control is an optional
feature not present on all caravan models)

Swift Sterling Specifications

General

Brand	Swift
Model	Sterling
Category	Caravans
Language	English