Sym MAXSYM 400i User Manual

14. Brake System
14-2
Precautions in Operation
Caution
Inhaling asbestos may cause disorders of respiration system or lung cancer; therefore, never use
compressed air or dry brush to clean brake parts. Use vacuum cleaner or other authorized tool instead.
 The brake caliper can be removed without removing the hydraulic system.
 Air should be bled from the hydraulic system when remove it or the brake system is slack.
 While refilling brake fluid, avoid mixing any other substances.
 Do not spill brake fluid on the painted surfaces, because plastic or rubber parts might be damaged.
 Check the operation of the brake system before riding.
Specifications unit: mm
Item
Standard
Limit
The thickness of the front brake disk
4.000
2.500
The thickness of the rear brake disk
5.000
3.500
Front and rear brake disk eccentricity
< 0.100
0.300
Front brake master cylinder inner diameter
11.000~11.043
11.055
Front brake master cylinder piston outer diameter
10.957~10.984
10.945
Rear brake master cylinder inner diameter
14.000~14.043
14.055
Rear brake master cylinder piston outer diameter
13.957~13.984
13.945
Diameter of front disk
240.000
Diameter of rear disk
220.000
─
Thickness of the front brake lining
5.000
.1
2.000
Thickness of the rear brake lining
6.000
2.000
Torque values:
Brake hose bolts 3.0~4.0kgf-m
Bolt for front brake caliper 2.9~3.5kgf-m
Brake lever nut 0.8~1.0kgf-m
Air-bleed valve 0.8~1.0kgf-m
To this chapter contents

Sym MAXSYM 400i Specifications

General

Brand	Sym
Model	MAXSYM 400i
Category	Scooter
Language	English