Troubleshooting 127
The firmware and hardware versions, and your
radio’s frequency band is briefly displayed.
Changing the radio ID
You can change the radio ID if the current ID is not
correct.
To change the radio ID your radio must have
alphanumeric keys.
1 Press Menu and select Radio settings >
Radio info > Radio ID.
2 Press the right selection key.
3 If Enter PIN appears in the display, enter the
correct sequence of keys (known as the technician
access PIN).
4 Press Clear to delete the current ID, and use a
combination of the scroll keys and alphanumeric
keys to enter a new ID.
5 Press Options > Store to save the new ID.
Running diagnostics tests
Diagnostics tests are available via the main menu.
This feature is controlled by a software license
(SFE) and may not be available with your radio.
1 Press Menu and select Diagnostics.
2 Scroll to the name of the test you want to run and
press Select.
The following table lists diagnostics tests you may find
on your radio.
Notice The radio may transmit when you select some
tests. Make sure you have a suitable load or antenna
connected before running diagnostics tests.
To Next Page
Loading...
Need help?
General
