Troubleshooting 97
Removing the microphone
For information on installing or removing your
radio from a vehicle, refer to the Installation
Guide.
1 Using your thumb or forefinger, lift up one of the
corners of the microphone grommet and firmly (but
gently) pull that corner until the seal comes away
from the cavity.
Notice Remove the grommet carefully as it serves
two important functions. Firstly, it prevents damage to
the microphone socket due to movement of the
microphone cord, and secondly, it ensures that the
control head is sealed against water, dust, and other
environmental hazards.
2 Repeat to expose another corner.
3 Pull the exposed corners back and slide the
grommet up the cable to reveal the microphone
plug.
4 Remove the plug from the microphone socket.
Tx power test Displays hardware-related information while the
radio is transmitting. Information includes the final
PA current (in mA), and estimated forward and
reverse power levels (in W) along with an indication
of (OK) or (!)
Test Description
microphone
grommet
To Next Page
Loading...
Need help?
General
