Specifications
Table 30: Auxil
iary Outputs (Flags)
Characteristics Description
Connector type SMB on rear panel.
Number of outputs AWG5202 and AWG5204: 4
AWG5208: 8
Output impedance AC nominal impedance: 50 Ω
DC source re
sistance: 28.3 Ω
Output amp
litude, typical
High: 4.97
V into open circuit (no load)
High: 3.17 V into 50 Ω
Low: 0.7 V into open circuit
Maximum toggle frequency Same as inverse of waveform duration 2400 samples m inimum waveform size in a sequence
Skew between outputs
460 ps, typical
2 ns, maximum
Delay from analog out PERF-50: (2.5 GS/s ≤ Sample rate ≤ 5.0 G S/s)
Delay < –
3800*FCLK (Sample clock cycles)
5 GHz sample clock (5 GS/s): Delay < –760 ns
2.5 GHz sample clock (2.5 GS/s): Delay < –1520 ns
X25: (S
ample rate ≤2.5 GS/s)
Delay < –(3720 × F
CLK
+ 128 ×(Sample Rate))
Flags precede analog output.
Table 31: Computer system
Characteristics Description
CPU Intel core I7-4700EQ, 4 core, 2.4 GHz, 6M cache.
Memory
16 GB (2 x 8 GB), DDR3-1600 or faster SODIMM.
Hard disk drive
Solid state, ≥1 T B, removable.
Video output
1 V GA port on rear panel.
ESATA 1 port on rear panel, 1.5 Gb/s.
Instrument must be powered down to m ake connection.
USB 4 ports, USB 3.0, rear panel, type A connector.
2 ports, USB 2.0, front panel, type A connector.
GPIB Available as an optional accessory that connects to the USB Device and USB Host ports
with the TEK-USB-488 GPIB to USB Adapter
The control interface is incorporated into the instrument user interface.
Video output
1 V GA port on rear-panel.
LAN
RJ-45 LAN connector s upporting 10/100/1000 Ethernet on rear panel.
AWG5200 Series Technical Reference 21
To Next Page
Loading...
Need help?
General
