Commands Listed in Alphabetical Order
Group
Save and Recall
Syntax
RECAll:WAVEform <file path>,REF<x>
Related Commands
SAVe:WAVEform, FILESystem:CWD, FILESystem
Arguments
REF<x> specifies a location in internal reference memory. Reference memory
location values range from 1 through 4.
<file p ath> specifies a location for an oscilloscope setup file. <file path> is
a quoted string that defines the file name and path. Input the file path using the
form
<drive>:/<dir>/<filename>.< extension> and one or <dir>s are
optional. If you do not specify them, the oscilloscope will read the file from the
default directory (see FILESystem:CWD). < fi lename> stands for a filename; the
use of wildcard cha racters in filenames is not supported. Filename extensions are
not required, but highly recommended.
Examples
RECALL:WAVEFORM "tek00000.isf",REF1 recalls the waveform stored in the
file named tek00000.isf from the current directory for waveforms to the ref erence
location 1.
REF<x>? (Query Only)
Returns reference waveform data for the channel specified by <x>, where x is
the reference channel number.
Group
Vertical
Syntax
REF<x>?
REF<x>:DATE? (Query Only)
Returns the date that reference waveform data for cha nnel <x> was copied into
the inter
nal referen ce memory, where x i s the reference channel number.
Group
Vertical
Syntax
REF<x>:DATE?
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-229
To Next Page
Loading...
Need help?
General
