Tektronix DPO2012 Programmer's Manual

Command Groups
Table 2-31: Tri
gger Commands
Command
Description
TRIGger
Forces a trigg
er event to
occur
TRIGger:FREQuency?
Returns the a
vailable trigger
frequency in hertz.
TRIGger:A Sets A trigger level to 50%
or returns current A trigger
parameters
TRIGger:A
:BUS
Sets or ret
urns the serial
trigger type
TRIGger:A:BUS:B <x>:CAN:CONDition Sets or returns the CAN
condition
TRIGger:A:BUS:B <x >:CAN:DATa:DIRection Sets or returns the CAN
trigger
condition to be valid
on a READ, WRITE, or either
TRIGger:A:BUS:B <x >:CAN :DATa:QUALifier Sets or returns the CAN data
qualifier
TRIGger:A:BUS:B <x>:CAN:DATa:SIZe Sets or returns the length of
the dat
astringinbytestobe
used for CAN trigger
TRIGger:A:BUS:B<x>:CAN:DATa:VALue Sets or returns the binary
datastringtobeusedfor
CAN t
rigger
TRIG
ger:A:BUS:B<x>:CAN:FRAMEtype
Sets
or returns the CAN
trigger frame type
TRIGger:A:BUS:B <x>:CAN{:IDentifier|:ADDRess}:MODe Sets or returns the CAN
addressing mode
TRIGger:A:BUS:B <x>:CAN{:IDentifier|:ADDRess}:VALue Sets or returns the b inary
ad
dress string used for the
CAN trigger
TRIGger:A:BUS:B <x>:LIN:CONDition Sets or returns the trigger
condition for LIN
TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue Sets or returns the binary
d
atastringtobeusedforLIN
trigger
TRIGger:A:BUS:B <x >:LIN:DATa:QUALifier Sets or returns the LIN data
qualifier
TRIGger:A:BUS:B <x>:LIN:DATa:SIZe Sets or returns the length of
thedatastringinbytestobe
used for LIN trigger
TRIGger:A:BUS:B<x>:LIN:DATa:VALue Sets or returns the binary
data string
TRIGger:A:BUS:B<x>:LIN:ERRTYPE Sets or returns the error type
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-41

Tektronix DPO2012 Specifications

General

Brand	Tektronix
Model	DPO2012
Category	Test Equipment
Language	English