Tektronix KEITHLEY DMM6500 User Manual

Section
4: TSP command reference DMM6500 6½-Digit Multimeter with Scanning
Calibration and Adjustment Manual
4-4 DMM6500-905-01 Rev. E June 2021
cal.adjust.step.setup()
This function sets up the specified adjustment step.
Type TSP-Link accessible Affected by Where saved Default value
Function Yes
Usage
cal.adjust.step.setup(stepname)
cal.adjust.step.setup(stepname, value)
stepname
The adjustment step to start
value
The value for this adjustment step. If using the default then value is optional
Details
This command generates an error if:
• Calibration is locked
• The step does not complete successfully
• The value that is passed is invalid for the step, out of range, or not needed
Also see
cal.lock() (on page 4-6)
cal.unlock() (on page 4-9)

Tektronix KEITHLEY DMM6500 Specifications

General

Brand	Tektronix
Model	KEITHLEY DMM6500
Category	Multimeter
Language	English