Tektronix MDO3000 Series Technical Reference

Performance Ver
ification
6. Push OK-Compensate Signal P aths on the side menu.
7. When the signal path compensation is complete, push Menu Off twice to clear the dialog box and Self Test menu.
8. Check the Signal Path button on the lower menu to verify that the status is Pass. If i t does not pass, run the test again.
If it still doe
s not pass, recalibrate the instrument or have the instrument serviced by qualified service personnel.
This comp lete
s the procedure.
72 MDO3000 Series Specifications and Performance Verification

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English