Commands Listed in Alphabetical Order
Conditions
MDO3000, MDO40
00/B, or MDO4000C models with option SA3 or SA6 only.
Group
RF
Syntax
MARKER:MANual {OFF|ON|0|1}
MARKER:MANual?
Related Commands
MARKER:M<x>:AMPLitude:ABSolute?, MARKER:M<x>:AMPLitude:
DELTa?, MARKER:M<x>:FREQuency:DELTa?, MARKER:M<x>:FREQuency:
ABSolute
Arguments
OFF or 0 turns the manual markers off.
ON or 1 turns the manual markers on.
Examples
MARKER:MANual 1 turns on the manual markers.
MARKER:MANual? might return 0, indicating that the manual markers are turned
off.
MARKER:M<x>:AMPLitude:ABSolute? (Query Only)
This query returns the actual amplitude (vertical) value of either of the two
manual markers that are available for frequency domain traces, in user-set units.
M<x> can be either M1, which specifies manual marker a,orM2,whichspecifies
manual marker b.(UseRF:UNIts to specify the units.)
Conditions
MDO3000, MDO4000/B, or MDO4000C models with option SA3 or SA6 only.
Group
RF
Syntax
MARKER:M<x>:AMPLitude:ABSolute?
Related Commands
MARKER:MANual, MARKER:M<x>:AMPLitude:DELTa?, MARKER:M<x>:
FREQuency:DELTa?, MARKER:M<x>:FREQuency:ABSolute
Examples
MARKER:M2:AMPLitude:ABSolute? might return -1.0E+01, indicating a
marker amplitude of -10 dBm.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-359
To Next Page
Loading...
Need help?
General
