Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
POWer:HARMon
ics:DISplay:SELect
This command specifies the harmonics to be displayed when the harmonics
standard is NONe.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
Syntax
POWer:HARMonics:DISplay:SELect {ODD|EVEN|ALL}
POWer:HARMonics:DISplay:SELect?
Arguments
ODD to display only odd harmonics.
EVEN todisplayonlyevenharmonics.
ALL todisplaybothoddandevenharmonics.
Examples
POWER:HARMONICS:DISPLAY:SELECT EVEN dis
plays only even harmonics.
POWER:HARMONICS:DISPLAY:SELECT? might return
:POWER:HARMONICS:DISPLAY:SELECT ALL in
dicating that both odd and
even harmonics are displayed.
POWer:HARMonics:DISplay:TYPe
This command specifies the display type for harmonics tests.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
Syntax
POWer:HARMonics:DISplay:TYPe {GRAph|TABle}
POWer:HARMonics:DISplay:TYPe?
Arguments
GRAph displays harmonic tests results in graphical format.
TABle displays harmonic tests results in tabular format.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-467

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English