Commands Listed in Alphabetical Order
WFMOutpre:BY
T_Or
This command specifies which byte of outgoing binary waveform data is
transmitted first (the byte order). The byte order can either be MSB (most
significant b
yte first) or LSB (least significant byte first, also known as IBM
format). This specification only has meaning when WFMOutpre:ENCdg is set
to BINary and WFMOutpre:BYT_Nr is 2. Changing WFMOutpre:BYT_Or also
changes DATa:ENCdg (if DATa:ENCdg is not ASCIi).
(See page 2-95, Waveform Transfer Command Group.)
(See page D-1, Wa veform Transfer (WFMOutpre and CURVe Query) Examples.)
Group
Waveform Transfer
Syntax
WFMO
utpre:BYT_Or {LSB|MSB}
WFMOutpre:BYT_Or?
Related Commands
WFMOutpre:ENCdg,
WFMOutpre:BYT_Nr
Arguments
LSB specifies that the least significant byte will be transmitted first.
MSB specifies that the most significant byte will be transmitted first.
Examples
WFMOUTPRE:BYT_OR MSB sets the most significant outgoing byte of waveform
data to be transmitted first.
WFMOUTPRE:BYT_OR? might return :WFMOUTPRE:BYT _OR LSB indicating that
the least significant data byte will be transmitted first.
WFMOutpre:CENTERFREQuency? (Query Only)
This query returns the center frequency of the incoming waveform. For non-MDO
models, this query always returns 0.
The center frequency is a precise frequency at the center of the display of the
frequency domain graticule. In many applications, it is a carrier frequency.
Conditions
MDO3000, MDO4000/B, or MDO4000C models with option SA3 or SA6 only.
Group
Waveform Transfer
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-963
To Next Page
Loading...
Need help?
General
